Panthera Multi-Purpose Stain Spot Cleaner - Carpet & Pet Stain Solution

Removes stains from upholstery, carpets, and car seats.

Two brush types: bristle for cleaning, rubber for pet hair.

Easy-fill water tank with MAX line; use mild solution or water only.

Float system stops suction when the wastewater tank is full.

Self-clean function cleans the hose and brush after use.

Simple controls and design for quick setup and storage

Capacity: Fill to ‘MAX’ line (warm water, max 40°C)

Capacity Wastewater Tank: 800mL

Usage: For carpets, upholstery, couches, car seats, and mats. Not for hard floors or dry vacuuming.

Power Source: Mains powered (220–240V)

Cord length: 5m

Hose: Flexible hose 1.4 m

Product Weight and Dimensions: 3.62kgs / 36.5 x 16.0 x 29.5cm

Suction power: ≥12KPa

 

1 x Panthera Carpet & Pet Stain Spot Cleaner

1 x Water tank

1 x Wastewater tank

2 x Cleaning brush

1 x Self-Cleaning Attachment

1 x Hose

1 x Power cord with storage bracket

1 x Cleaning brush storage bracket

1 x Foam filter

1 x Instruction Manual

Always unplug before cleaning.

Empty both clean water and wastewater tanks after each use.

Rinse and dry the wastewater tank, float, and water fill guide regularly.

Wash brush attachments under running water, remove hair and debris.

Clean and dry the foam filter regularly to maintain suction.

Use the self-cleaning attachment after each use to clear the hose.

Avoid leaving water in tanks to prevent mineral deposits and mildew.

Store in a clean, dry place, ideally in original packaging.

Only use mild, low-foam cleaning solutions; avoid solvents and foaming detergents.

Always switch off and unplug the Spot Cleaner before attaching or removing accessories or tanks.

Vacuum surfaces thoroughly before use; do not use on hard floors.

Water temperature must not exceed 40°C.

Avoid using foam detergents, solvents, or harsh chemicals; keep cleaning agents out of children’s reach.

Do not leave water in tanks; clean and dry after use to prevent mildew and damage.

Never use the Spot Cleaner as a dry vacuum.

Do not open water tanks during operation.

Stop use and troubleshoot if suction weakens; unblock and clean if necessary before resuming.

Keep all parts intact and correctly installed for safe operation.

If the machine stops unexpectedly, switch off, unplug, and allow to cool before retrying or contacting support.

What is a Spot Cleaner?

A spot cleaner is a portable cleaning device designed to remove small stains, spills, and localised dirt from carpets, upholstery, car seats, and similar surfaces. It uses a combination of water, cleaning solution, brushes, and suction to deep-clean targeted areas without the need to clean an entire carpet or fabric item. Spot cleaners are ideal for quick and effective treatment of accidental messes and high-traffic stains.

How to use The Panthera Spot Cleaner?

Preparation:

Vacuum the area first.

Fill the clean water tank with water and optional mild cleaning solution (do not exceed the MAX line, water ≤40°C).

Attach the clean water and wastewater tanks securely.

Choose and attach a brush (bristle or rubber).

Cleaning:

Plug in and switch ON.

Press the clean water trigger while moving the brush over the stain to apply the solution.

Release the trigger and suction up dirty water.

After Use:

Turn OFF the unit.

Empty and clean the wastewater tank.

Use the self-cleaning attachment to flush the hose with clean water.

Store in a dry, safe place.

What is the best Pet Spot Cleaner?

The best pet spot cleaner is one with strong suction power, like the Panthera Spot Cleaner. It is great for cleaning carpets, upholstery, stairs, and car interiors. It removes both new and old pet stains effectively. Additionally, it offers excellent value for its price, making it a smart and affordable choice.

Can I use hot water in Panthera Spot Cleaner? 

You should not use hot water in the Panthera Spot Cleaner. The usage instructions specifically advise filling the clean water tank with warm water up to a maximum temperature of 40°C. Using water hotter than this can damage the appliance. Always adhere to the “MAX” fill line and temperature limits to ensure safe and effective operation.

What to put in a Spot Cleaner?

Clean Water: Fill the clean water tank with warm water (maximum temperature 40°C). Do not exceed the 'MAX' fill line.

Mild Cleaning Solution: Avoid using foam detergents, solvents, or harsh chemicals. Choose a solution designed specifically for spot cleaning carpets and upholstery. Follow the instructions on the solution packaging for the correct amount. Some spot cleaners can also be used with water alone.

Can I use a spot cleaner on a mattress? 

The Panthera Spot Cleaner is primarily designed for cleaning carpets, upholstery, couches, car seats, and mats. While it can clean upholstery and fabric surfaces, cleaning a mattress with it is generally possible but should be done carefully. Before cleaning a mattress with the Panthera Spot Cleaner:

Vacuum the mattress thoroughly to remove dust and debris.

Test a small, hidden area on the mattress for colourfastness and fabric reaction.

Use only recommended mild cleaning solutions suitable for upholstery.

Avoid over-wetting the mattress to prevent mould or mildew.

Allow the mattress to dry completely before use.