Jump to main content

Panthera Countertop Ice Machine - Bullet Shape

$149.99
  • Self cleaning function for your convenience
  • Included manual to easily guide setup
  • Sensors aid automatic shut off when ice bucket is full or when water tank is low
  • Efficently makes approximately 9 pieces of ice every 6-8 minutes

Check delivery & pickup

The Panthera Countertop Ice Machine - Bullet Shape has all you need packed into one efficent and easy to use ice maker. With a working temperature of 10 to -32C, a removable ice bucket and scoop and a self cleaning function, you can be sure that the Panthera Ice Maker Bullet Shaped is one of the best options when it comes to ice makers.

Removable ice bucket & scoop

Working temperature of 10 to -32C

2 types of ice bullets - clear ice or frosted

1.3L water tank

2 ice bullet sizes 2x2.5cm or 2.5x3cm
2 types of ice - clear or 'normal'
1.3L water tank
working temp 10 to -32°C
Makes approx 9pc every 6-8mins - approx 12kg in 24hrs
Machine dimensions: 22.5x29.4x28.5 cm

1x Removable ice bucket
1 x Ice scoop
1 x Manual

1.Starting the Machine: Open the lid, remove the ice basket and add water to the water tank. Be careful not to exceed the maximum water level. Then place the ice basket back, 
close the lid, and press the “Start/Pause” button on the control panel to start making ice.
2. Selecting Ice Cube Size:The machine has two sizes of ice cubes. Adjust the size using the “Mode” button on the control panel.
3.Selecting Ice Cube type:The machine has two type of ice cubes. Adjust the type using the “Crystal” button on the control panel.
4.Ice Making Cycle:Each cycle takes about 6-13 minutes, depending on the size and type of the ice cubes selected and the ambient temperature. The ice-making speed will also vary based on water and room temperature.
5.Cleaning After Use;Once the machine has completed a cycle, wait until the unit is idle. Press the “Start/Pause” button for 3 seconds, and the full ice and power lights will flash alternately, activating the self-cleaning function. During the cleaning process, be careful as there may be water in the tank. If you need to stop cleaning, press the “Start/Pause” button for 1 second.
6. When the "Ice Full" light is on, the machine will automatically stop making ice. The ice cubes must be removed to continue operation. When the "Add Water" light is on, water needs to be added to the tank. After adding water, press the “Start/Pause” button again to resume operation

1. Only potable water (such as purified water) can be used. Do not use non-drinking water, sugared water, or tea to make ice.
2. When using the appliance, basic safety measures must be taken to reduce the risk of fire, electric shock, and injury. Read the full instructions before using any electrical appliance.
3. Keep the product out of the reach of children. Children under 8 must be supervised by an adult when using the product.
4. Do not use the appliance outdoors. Avoid exposure to rain. Place the appliance in a well-ventilated area, ensuring it is at least 300mm away from walls or other objects.
5. The refrigeration system is under high pressure. Do not tamper with it. Installation and maintenance should be performed by professionals. Any issues should be reported to designated service centers.
6. Keep the appliance away from heat sources. Avoid placing it near flammable materials.
7. Before using the ice maker, thoroughly clean it with a soft cloth, but do not immerse the machine in water. When not using the machine for extended periods, drain the water from the tank and store it in a dry, ventilated place

Related Products

End of Related Products